Industrial oven can be used continuously for a long time in the mass production of industrial and mining enterprises or workshops. It is mainly used for product dehydration and drying. In the electroplating industry, electronic industry, alloy jewelry dripping oil, leather industry, metal industry and other production industries are very common, but not for strong hair, flammable and explosive and other items, or it is easy to cause the risk of explosion. Therefore, in the process of use, relevant operations should be carried out according to the operating instructions, or the equipment should be pretended to be explosion-proof device, so as to enhance the safety guarantee.

When we need to use industrial oven, we should pay attention to the following points:

1. Before use: check whether the electrical is abnormal before use, put the glass container in the oven, turn on the power switch, and adjust the appropriate temperature and heating time.

2. Use: when using the industrial oven, if it is necessary to operate the oven, professional protective devices should be worn to protect personal safety. During the working period, do not leave the processing area. Smoking and drinking are strictly prohibited.

3. After use: after the use of the industrial oven, the power switch must be turned off immediately and the door of the oven must be closed. The appliance and its surroundings should be cleaned and put back in place after use.

4. In case of emergency, such as failure of industrial oven, inform the office and the security team first, and immediately send the personnel to the clinic or hospital for treatment. After the situation is stable, find professional personnel to repair the equipment or send it back to the manufacturer for repair.

The working principle of industrial oven is to use the link of digital display instrument and temperature sensor to control the temperature of the studio, the hot air circulation system is used to dry boring, hot air circulation system is divided into two kinds of horizontal air supply and vertical air supply. After we Kang Heng instrument laboratory equipment, professional design, pouring by motor driven supply wind turbines, makes out the wind blowing on the heating tube, formed the hot air, then hot air by air duct into the industrial working indoors, and the use of hot air can be inhaled air duct forming again after cyclic heating function, greatly enhance the uniformity of the temperature.